① JTM-SP series, it's multi-stages cleaning system. This series is mainly used to clean molds. For washing and drying before coating or plating. The functions of each stage can be customized.
② JTM-SD series, it’s full automated cleaning system All the cleaning working is finished automatically by robot arm and PLC. Customize the cleaning process according to customer cleaning products
③ JTM-PH series, it’s tunnel cleaning and drying line. Cleaning process is finished by high pressure water spraying. Drying process is finished by compressed air blowing and hot air drying.
Composition: Consists of overflow dam, overflow pocket, pipes, storage tank, filter, pump, values, liquid level switch Advantages: 1. Recycle clean water and detergent, saving water and detergent 2. With oil separator, accumulate oil and dirt in storage tank and discharge 3. Avoid secondary pollution when taking out the workpiece from tank For big tank bath, filtration system is necessary, greatly reduce the frequency of changing water and chemicals
Lifter
Composition: Motor, for driving the frame up and down Frame, for loading the parts and basket
Agitator
Composition: Motor, eccentric wheel The motor drives the eccentric mechanism to rotate, move the basket up and down in the cleaning tank for about 30 cycles per minutes
Barbotage/ Bubbling
Composition: Air compressor, pipe with holes on the bottom of tank.
Cooling System and Explosive Proof
Multi-frequency: The default frequency is 28khz or 40khz, other frequency is also available, 17khz, 20khz, 35khz, 68khz, 80khz, 120khz, 132khz.
Parameters
Model Number
JTM-SP
JTM-SD
JTM-PH Series
Tank Capacity
Customized
Function
Customized
Ultrasonic Frequency
Customized
Ultrasonic power
Customized
Heating Power
Customized
Unit Size
Customized
Tank Size
Customized
FAQs
FAQs
When should the provided basket and stand be used?
No matter what items to clean, please make sure that your items are placed in the basket and then placed in the ultrasonic cleaner, so as to avoid damage to the items from rubbing against each other. Remember to use a stand when cleaning your watch.
How long should I run my ultrasonic cleaner for?
The length of time you should run your ultrasonic cleaner for will depend on the item you are cleaning and the level of contamination. Typically, cleaning jewelry, glasses, and other small items of daily life can be cleaned in 3-5 minutes. We suggest you can set the cleaning time for 2-3 minutes first and observe the cleaning situation. You can put it in for longer or for a second wash if you think they’re still grimy.
What type of cleaning solution should I use with my ultrasonic cleaner?
The type of cleaning solution you use will depend on the item you are cleaning. For example, you might use a mild detergent for cleaning jewelry, while a more heavy-duty solvent might be required for cleaning industrial parts. Always consult the manufacturer's instructions or the cleaning solution supplier for guidance.
How often should I clean my ultrasonic cleaner?
It is important to clean your ultrasonic cleaner regularly to maintain its effectiveness. The frequency of cleaning will depend on how often you use the cleaner and the level of contamination of the items being cleaned. As a general rule, you should clean the ultrasonic cleaner at least once a month.
Can I clean multiple items at once in an ultrasonic cleaner?
Yes, you can clean multiple items at once in an ultrasonic cleaner, as long as they are compatible with the cleaning solution and do not touch or overlap during the cleaning process. It is also important to ensure that the ultrasonic cleaner is not overloaded, as this can reduce the effectiveness of the cleaning process.
What is the degass function?
Using intermittent working mode, cycle start and stop facilitates the discharge of air in the liquid, increases liquid penetration and maintains ultrasonic cleaning ability. The Degas function can reduces the oxidation of the items at the same time of decontamination.
